SPW32
design and efficiency
These dehumidifiers for indoor pools are installed on the wall in the room adjacent to the local swimming pool to be dehumidified through the brackets that are supplied.
The settings are made through a practical “soft touch” button panel, which can be remoteed via the supplied cable and installed separately from the machine.
Inside the wiring is designed to install and manage all available accessories, and includes as standard a humidity sensor and a temperature sensor, also remote from will by cable supplied.
Thanks to electronic control, the machine can be used to dehumidify, recycle air and, in case of use of heating accessories available separately, to heat the room.
These functions can be performed separately or at the same time as needed. The exclusive and elegant line easily adapts to particular environments such as indoor pools, indoor pools, spas, museums, warehouses.
indicative handling volume600 m³
condensation capacity52,2 L/24 h
working temperature+10 / +32 °C
52,2 L/24h
High condensation capacity
SAFETY
designed to work efficiently in pool environments.
ECOLOGICAL
The use of ecological refrigerant gas makes these appliances extremely environmentally friendly.
Construction
Both the bodywork and the frame are entirely made of galvanized sheet metal: the robustness of the metal and the subsequent high temperature powder coating make these devices suitable for the heaviest uses and gives the machines quality and robustness over time. The exchangers are also protected by painting: this treatment arises from the need to protect them in rooms with swimming pool where the chlorine present in the air is very aggressive towards metals such as copper, aluminum and iron. The machines must be installed on the wall and are supplied with all the brackets necessary for assembly. The exclusive and elegant design will enrich the environments in which the dehumidifier will be installed, such as swimming pools, making them even more comfortable and pleasant to live.
Components
All machines have been carefully studied and tested; the individual components that make up the actual engine of the dehumidifier have been selected to work efficiently and permanently. The use of rotary compressors has allowed to reduce consumption and optimize performance, the exchangers have been painted to be protected from chlorine.
Electronic Control
The new electronic control optimizes the operation of the dehumidifier while the internal humidity sensor, supplied as standard on all models, only makes the device work when needed, optimizing consumption. The control panel and the temperature and humidity sensors are remote from the user during installation. The dynamic defrosting function also minimizes the time it takes to remove any ice from the exchanger, a function necessary to keep the machine’s efficiency level high at the lowest temperatures. The dehumidifier is designed to handle auxiliary accessories when installed.
Made in ITALY: Cuoghi dehumidifiers are designed, built and assembled in Italy at our Albignasego plant in Padua.
 SPW32 |  SPW46 |  SPW72 |
|
| Operating temperature range [°C] | +10 … +32 | +10 … +32 | +10 … +32 |
| Operating humidity range [U.R.%] (not condensing) | 40 … 100 | 40 … 100 | 40 … 100 |
| Defrosting | Normal | Normal | Normal |
| Condensation Capacity [L/24 hour] at 30°C, 80% R.H. | 52,2 | 86,9 | 118,6 |
| Condensation Capacity [L/24 hour] at 25°C, 65% R.H. | 32,3 | 55,9 | 73,4 |
| Air Flow [m³/hr] | 600 | 680 | 740 |
| Power Supply | 230 V / 50 Hz | 230 V / 50 Hz | 230 V / 50 Hz |
| Absorbed Current (maximum) [A] | 3,4 | 5,1 | 8,6 |
| Absorbed Power (maximum) [W] | 690 | 1140 | 1910 |
| Refrigerant | R32 | R32 | R32 |
| Noise Level at 1 meter [dBa] | 57 | 59 | 59 |
| Dry weight [Kg] | 68 | 72 | 77 |
| Dimensions W x H x D [mm] | 1174×824×320 | 1174×824×320 | 1174×824×320 |
Data subject to variations without notice.
